Soft & Thick Plate For Corrugated Board And Paper Sack Printing
The AFP-SE plate satisfies the severest criteria of quality in printing corrugated board, solid board and heavy-duty bags.
The wide exposure latitude of the AFP-SE plate ensures that image elements like 3% tones and isolated lines 250µm are optimally anchored even with a relief depth of 3mm (0.118″). At the same time, intermediate depths form evenly and the relief is produced with steep shoulders.
- Wide exposure latitude
- Optimum intermediate depths
- Steep relief shoulders
- Shorter processing time
- Excellent ink transfer
- Superb ink coverage
|Plate Thickness||2.84mm; 3.18mm; 3.94mm; 4.70mm; 5.00mm; 6.35mm or 0.112″; 0.125″; 0.155″; 0.185″; 0.197″; 0.250″|
|Inks & Solvents||The AFP-SE plate is suitable for use with flexo inks based on alcohole or water. It is permissible to use solvent mixtures containing a limited amount of active solvents (ethyl acetate content-preferably under 10%).|
|Storage Of Raw Plates||AFP-SE plates should be stored at a room temperature of 5-25°C and relative humidity of 55%.|
|Storage Of Used Plates||Careful cleaning of the plates after printing is recommended. Direct exposure to sunlight, heat and high concentrations of ozone should be avoided.|