Machine to detach plate and tape from sleeves and to apply tape on sleeves

The Traho 426 is used for repeats from 240 mm up to 1250 mm.  Designed and manufactured to facilitate the operator during the dismounting phase after printing.


  • It allows to remove the plate from the sleeve without using the hands avoiding thus any damages, while to remove easily the tape it is enough to hold it up to prevent gluing.
  • The sleeve is put on three supporting rollers. One idle and motorized for different print repeats and two motorized to get the detachment of the plate or of the tape.
  • The detach speed is according to EC Regulation.
  • The operator has to his disposal a bidirectional pedal.
  • A container is placed under the rollers to receive plates of any sizes.