TROIKA SYSTEMS

TROIKA SYSTEMS, LTD.

Accuracy Where It's Needed Most

Troika Systems Limited are the leading manufacturer of 2D and 3D scanning microscopes for the printing industry. Troika has set new standards for quality assurance in the printing, embossing and coating markets with its easy-to-use AniCAM HD™ and SurfaceCAM HD™ 3D scanning microscopes.”

There are now thousands of AniCAM and SurfaceCAM 3D systems in operation globally and we proactively work with our customers to reduce waste and ink with a typical saving to printers of up to 55% Ink waste reduction, 15% make ready waste savings and 5% increase productivity. All these measures will help you towards your sustainability goals.

Troika estimates that use of the AniCAM and its associated product range saves the print industry in excess of 1 billion meters of make ready waste per year.

HARDWARE

AniCam HD

The AniCAM HD is used for the inspection of Anilox rolls, Gravure Cylinders and Flexoplates. The new AniCAM HD allows users to achieve faster, more accurate results, whilst maintaining simple user interaction.

SurfaceCam HD

The SurfaceCAM 3D Scanning Microscope is a precision optical instrument and can work on a wide range of materials. The SurfaceCAM is used for the scanning of Gravure, Embossing cylinders and Low Screen Anilox.

MagneCam HD

The MagneCAM HD Option gives you the positioning of an AniCAM or SurfaceCAM on steel cylinders/rolls rotated at any angle incorporating magnetic legs and special internal drive couplings.

SOFTWARE

Anilox

Knowing the condition of the anilox rolls for a printer/converter has been proven to save considerable press setup time and reduce waste which inevitably increases profitability. With the AniCAM HD users have the tool to provide key information and to improve operational profitability and improve print quality.

Flexoplate

Having optimum control of your flexo plates and sleeves will save you time, waste and money. The AniCAM with Flexoplate QC provides two readings methods: 2 dimensional readings with an automatic reflective or translucent dot detection and a 3 dimensional analysis which provides additional information on dot shape, height and relief depths.

Gravure

Knowing the condition of the Cylinders for Gravure printers has been proven to save considerable press setup time and reduce waste which inevitably increases profitability. The AniCAM Gravure QC was developed for gravure printers where management of, and quality control of, the cylinders is desired.

TROIKA SYSTEMS

TROIKA SYSTEMS, LTD.

HARDWARE

SOFTWARE

JOIN OUR MAILING LIST